Would you like to react to this message? Create an account in a few clicks or log in to continue.

You are not connected. Please login or register

Plotter function missing in 0.4.15

2 posters

Go down  Message [Page 1 of 1]

1Plotter function missing in 0.4.15  Empty Plotter function missing in 0.4.15 Thu Dec 15, 2022 9:29 pm

FCK



The plotter option when right click on probe is missing. I tested it on both Ubuntu 64 and Win7 64 systems. Regards.

2Plotter function missing in 0.4.15  Empty Re: Plotter function missing in 0.4.15 Fri Dec 16, 2022 1:52 pm

arcachofo

arcachofo

Yes, this functionality has changed.

Now everything is done in the Oscilloscope, watch this video to have an idea:
https://www.youtube.com/watch?v=PxmmZNwlDXQ

KerimF likes this post

FCK



I happen to experiment with simple circuit to generate a spike to close and open a relay. To do that in the Simulate version 0.13 with plotter was a breeze. As with most hobbyists, my experience with oscilloscopes is none. All my efforts to replicate the Plotter output with the Oscope failed. Can you give me some advise?

4Plotter function missing in 0.4.15  Empty Re: Plotter function missing in 0.4.15 Mon Dec 26, 2022 7:46 pm

arcachofo

arcachofo

Hi, watch this video to have an idea:
https://www.youtube.com/watch?v=PxmmZNwlDXQ

But you can start by setting a time division long enough, for example 500 ms.

Sponsored content



Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum