R972 problems

Hello,

two problems I have noticed for the moment.

1) Pin 8 on Arduino Uno refuses to work as "PULL_UP_INPUT" (this worked fine int R872). However pin 7, for example, works.
I haven't tested other pins.

2) OP-amp in a role of comparator: it does not work on "Vin higher than Vref" (with inverting input as Vref, non-inverting input as Vin) - unless I messed up something. This does NOT work in R872 also.
However OP-amp as comparator principle works imy VU meter project. https://www.youtube.com/watch?v=i-Hup9x3toE
I cannot load a schematics; I get "Uploaded file is not valid: exceeded image dimensions limit (image size : [512 x 389], limit : [1 x 1]).".

Regards,
Marjan

To add images to your posts, have a look here:
https://simulide.forumotion.com/t383-how-to-add-pictures-and-attachnents-to-your-posts

I will have a look to those bugs.

I edited my report and appended schematics.

Both problems seem solved at Rev 928.

You can see last commits here:
https://bazaar.launchpad.net/~arcachofo/simulide/1.0.0/changes

About the schematic:
You need to adjust opAmp voltage is Properties->Suply.

There is an error setting this property (solved at Rev 930) but this is not the main problem.

EDIT:
There is a problem that looks similar to this: https://simulide.forumotion.com/t455-ili9341-the-nightmare-continues

Hopefully this circuit will help to solve it.

Op-amp problem solved at Rev 931.

Arduino pullups are working for me.
If they are not working for you let me know and share your code.

I confirm that "OP-amp as comparator" is now working as expected.

However I still have a pull-up problem on Arduino Uno pin 8. Project is attached.

Regards,
Marjan

Thanks.
The pullup is indeed working, you can check adding a probe.
The problem is deeper... and the solution is not tribial. I'm working in it right now.

Finally it was easier than I expected.
Problem solved at Rev 933.

Also found the problem in ILI9341.

Yes, pull-up input is now working properly on Arduino pin 8.

I also noted, that DS1307 example is now working.

Kind regards,
Marjan