PCF8574. I2C TO PARALLEL

Would it be possible to swap the order of the SCL and SDA on PCF8574 (Converters/ I2C to parallel) in order to avoid having to cross the cables  always with Arduino UNO and Nano?. I have created a new component like this, but from this new one You cannot change the address.



https://i.servimg.com/u/f82/20/41/44/47/cross10.png

This kindof the "standard" as some other components use this arrangement.
In adition now you do vertical mirror.

Well, and can You tell me somethig about the problem of the address in my new component?

Well, and can You say me somethig about the problem of the address in my new component?

Which problem?

As I told you before... "I have created a new component like this, but from this new one I cannot access and change the address from properties".

As I told you before... "I have created a new component like this, but from this new one I cannot access and change the address from properties".

You need to set I2CToParallel as main component.
But Looks like there is a problem...

By now you can do this trick, open the circuit of your new component and:
1- Open properties in the Package component.
2- Select type = Board.
3- Right-click in the Package component and click on "Select Main Component".
4- Click on I2CToParallel: it will become yellow.
5- Select type = None.
6- Save circuit.

Now yor new component will have an extended context menu.
Then you can open properties of I2CToParallel and set address.

Following your instrutions, the new component WORKS OK and it is possible to access the address and I2c Frecuency too.

Thank you very much for your effective help.

I have done your procedure in several circuits and they work. I attach here a particular exaple working, but the led body is yellow always. Tell me, please.

An other example similar to the before one, but working fine and the led body is not yellow.

I have done your procedure in several circuits and they work. I attach here a particular exaple working, but the led body is yellow always. Tell me, please.

There is a problem with some properties like led color or wave type in wave generator, related to translations.

It is already partially fixed.

Yellow not the led color like red, green and so on...
The YELLOW of the "main component" selected in the component creation procedure. Take a look at my attachment... LED IS LIKE A RADIOGRAPHIE.
Do you anderstand me?
I am doing more info about this...

Yellow not the led color like red, green and so on...
The YELLOW of the "main component" selected in the component creation procedure.
Do you anderstand me?

Ok, now I understand.
Solved at Rev 1147.

Solved at Rev 1147.