Would you like to react to this message? Create an account in a few clicks or log in to continue.

You are not connected. Please login or register

Crash subcircuits

2 posters

Go down  Message [Page 1 of 1]

1Crash subcircuits Empty Crash subcircuits Tue Nov 24, 2020 12:51 pm


I created a subcircuit (see attached file "module1relais"). We can see the circuit with relay, source, probe, transistor, GND,... and the package circuit ( save as "module1relais.package") with 6 pins.

When i right-click on "Create subcircuit", SimulIDE crashes.
In my personel folder "/.../share/simulside/data/", it created a new "module1relais.package" but no "module1relais.subcircuit"...

What's wrong with my circuit?
I precise it can create a subcircuit, i tested with the 74HC113 native circuit.

Thank you in advance!
Crash subcircuits Attachmentmodule1relais.zip
You don't have permission to download attachments.
(3 Kb) Downloaded 3 times

2Crash subcircuits Empty Re: Crash subcircuits Tue Nov 24, 2020 4:26 pm




You can't use relays in subcircuits ( at least not in in 0.4.13 ).

Looks like you want to do something like an analog multiplexer.
Why not using an analog multiplexer component instead?
Do you actually need a relay?

3Crash subcircuits Empty Re: Crash subcircuits Tue Nov 24, 2020 5:53 pm


Thank you for your quick answer.
Indeed, i can use an analog multiplexer, it can realise what i want to do.
I'm novice in electronics and all the more in this sofware.

Perhaps the new version would integrate relays in subcircuits...


Sponsored content

Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum