SIMIDE VER 100RC2R1007. Reset on UNO not working

Connecting a pushbutton between GND and the terminal RESET (pin RST1 or 2) on the Arduino UNO with pullup not reset the controller.

Reset on Arduino is working for me.

Can you share an example that produces the problem?

I am not able to send the zip, could give me some indication about this, please? thanks.

I send to you a example where reset does not do the same thing that the start button on Simulide.

It is doing the same thing for me: blink the led at 1 Hz.

in the image is the error, black part on schematic...

So it changed from: "not reset the controller" to: "does not do the same thing that the start button" to: there is an Error message...

Yes, RST produces this error and does not the same that the red button start on SIMIDE. This is the summary

With this example you can better see the diference between RST and START.

NB: I am sending you a new email on the subject because I do not know to add a new file zip to the wheel of emails.

With this example you can better see the diference between RST and START.

Now we have something...

NB: I am sending you a new email on the subject because I do not know to add a new file zip to the wheel of emails.

Click on "Post Reply" instead of doing a "Quick reply":

Thanks, Iwil use this next time.

Hi,

According with our conversation, I have found a circuit with which the reset wors very differently from the Simulide RED POWER CIRCUIT button. Press the reset several times and You will see that strange thins happen. Using the new version Side1101. I am waiting for your comments.

Thank you very much.

LCD_COUNTER is working Ok for me now.

RIEGO_RELE is still doing weird things, but I don't have the ino file to see what is causing it.
Can you share the ino file?

OK, ASAP, thanks.

Files RELE_RIEGO...

Now it is ok, change the post to green, please.