Latest imagesWhen I use a decrease in the stratum for(i=3; i>0; i--) keeps flashing the LED in the 0 position. And the sketch is blocked, it doesn't come out there
for() crashes with decrements when testing a sketch uploaded to Arduino Uno
2 posters
Message [Page 1 of 1]
1
for() crashes with decrements when testing a sketch uploaded to Arduino Uno Fri Nov 03, 2023 9:31 pm
Lazlo_Lozla
2 Re: for() crashes with decrements when testing a sketch uploaded to Arduino Uno Sat Nov 04, 2023 2:07 am
Defran
i>0 is not a limit, try i<4 for instance.
Lazlo_Lozla likes this post
3 Re: for() crashes with decrements when testing a sketch uploaded to Arduino Uno Sat Nov 04, 2023 2:12 pm
Lazlo_Lozla
Yes. The mistake was mine. I didn't write the sketch correctly. Thank you.
Message [Page 1 of 1]
» Discussions About SimulIDE Simulator » Report Bugs » for() crashes with decrements when testing a sketch uploaded to Arduino Uno
Similar topics
» Arduino Mega not executing my sketch
» Arduino compiler can't find includes in sketch folder.
» SimulIDE not uploading compiled sketch to virtual arduino (everything done inside SimulIDE)
» Test of package pic16f1826 failed with following source code
» #error The Joystick library can only be used with a USB MCU (e.g. Arduino Leonardo, Arduino Micro, etc.).
» Arduino compiler can't find includes in sketch folder.
» SimulIDE not uploading compiled sketch to virtual arduino (everything done inside SimulIDE)
» Test of package pic16f1826 failed with following source code
» #error The Joystick library can only be used with a USB MCU (e.g. Arduino Leonardo, Arduino Micro, etc.).
Permissions in this forum:
You cannot reply to topics in this forum