Latest imagesTurning the trigger on and off with buttons
FLIP-FLOP UNESTABLE
3 posters
Message [Page 1 of 1]
4
Re: FLIP-FLOP UNESTABLE Sun Aug 07, 2022 3:22 pm
arcachofo
Initial state of flipflops is random as in real life.
I think this explains all these cases.
I think this explains all these cases.
5 Re: FLIP-FLOP UNESTABLE Mon Aug 08, 2022 9:15 am
Alex68
Good afternoon ! Trigger operation on single inverters does not work when turned on. Inverters are being excited. That's all. Why is this happening in the program?
https://disk.yandex.ru/d/znLr_R7PyMiOtg
https://disk.yandex.ru/d/znLr_R7PyMiOtg
6 Re: FLIP-FLOP UNESTABLE Mon Aug 08, 2022 4:08 pm
Alex68
Increased the delay of the inverter and everything worked
9 Re: FLIP-FLOP UNESTABLE Tue Aug 09, 2022 8:53 am
Defran
Strange driver.
Is it made by you?
Is it a inverter?
Is it made by you?
Is it a inverter?
10 Re: FLIP-FLOP UNESTABLE Tue Aug 09, 2022 9:43 am
Alex68
Defran wrote:Strange driver.
Is it made by you?
Is it a inverter?
No, it's not an inverter. These are six level converters from 15 volts - 5 volts. In the program in the editor, you need to set the input and output levels. With 5 volt and 5 volt outputs, it works as a delayed buffer.
https://disk.yandex.ru/d/lN4OOORwgtQfbQ
11 Re: FLIP-FLOP UNESTABLE Tue Aug 09, 2022 11:28 am
Defran
I know what the 4050 is. I ask you about the symbol, but it does not matter.
------------------------
Where is the inverter what do you mention here?
------------------------
Where is the inverter what do you mention here?
12 Re: FLIP-FLOP UNESTABLE Tue Aug 09, 2022 1:36 pm
Alex68
And on what the trigger is made. This is element 2i with iversion.
Learn boolean logic.
Learn boolean logic.
13 Re: FLIP-FLOP UNESTABLE Tue Aug 09, 2022 5:25 pm
Defran
I think your translator is not working well...
Message [Page 1 of 1]
Similar topics
Permissions in this forum:
You cannot reply to topics in this forum