some Feature Requests for the MCU Monitor

It would be great to improve the user interactions in the RAM monitor:
- Selecting a new line after clicking on a register in the list to insert it.
- Inserting selected registers on pushing <return>
- <Ctrl>+tab for moving between the different lists
- at the Flash Monitor the columns size for the hex values i a bit to small to see the numbers. Only a "_" is shown.


This things are at least not available in WIN10 R779.

It would be great to improve the user interactions in the RAM monitor:
- Selecting a new line after clicking on a register in the list to insert it.
- Inserting selected registers on pushing
- +tab for moving between the different lists

Ok.

at the Flash Monitor the columns size for the hex values i a bit to small to see the numbers. Only a "_" is shown.

I can't reproduce this problem.
Does it also happen in "Byte PC"?
Screenshots would be very helpful: one with the problem and one without (for example RAM or EEPROM).

The "problem" only appears when the Byte PC option is active.
I changed the width manually for the coumns 00..07 manually in the second picture.

Thanks.
Looks another problem about font size.
I will solve solve it as soon as I finish with some issues...

Problem with font size is hopefully solved at Rev 817.

- Selecting a new line after clicking on a register in the list to insert it.
- Inserting selected registers on pushing

Implemented at Rev 825.