Would you like to react to this message? Create an account in a few clicks or log in to continue.

You are not connected. Please login or register

7 Segaments Dot Point

2 posters

Go down  Message [Page 1 of 1]

17 Segaments Dot Point Empty 7 Segaments Dot Point Fri Oct 01, 2021 11:18 pm

Defran



Arduino. In Components/ Outputs/ 7 segments... The DP only appears in the first display when I select 4. 4 DP should appear too in order to use the 2 display for instance.

27 Segaments Dot Point Empty Re: 7 Segaments Dot Point Sat Oct 02, 2021 8:36 am

arcachofo

arcachofo

Hi.

All pins are connected to all displays.
Ussually you need to multiplex displays: setup the value you want, then select the display you want to show the value:

7 Segaments Dot Point Sevseg10

37 Segaments Dot Point Empty dp display Sat Oct 02, 2021 4:16 pm

Defran



ok, but logically DP should be on the left as one more segment, otherwise it is confusing.

47 Segaments Dot Point Empty Re: 7 Segaments Dot Point Sat Oct 02, 2021 4:41 pm

arcachofo

arcachofo

ok, but logically DP should be on the left as one more segment, otherwise it is confusing.
Yes, that would be optimal, but then the display would be too big.

what I did is adding labels to the pins, so it is easier to recognize:

7 Segaments Dot Point Sese10

57 Segaments Dot Point Empty 7 Segaments Dot Point Sat Oct 02, 2021 6:22 pm

Defran



very good idea.

Sponsored content



Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum