T1530_NOT LIGHT IN 8X8 MATRIX

OK. With T1452....



BAD. With T1530....



It hardly lights up and in configuration it is not possible adjust or change color.

You can test it with projets #36 or #106.
Tell me please.

OK, The intensity is resolved in each project. beefore with 1 o 2 values, the matrix was shining ok, now the range is more extense and it needs higher values. Solved but...

The color is not possible to change as in T1452 for instance.

Tell me please.

The intensity was wrong, you can test it using the example: examples/Outputs/Leds/max72xx_matrix/MD_MAX72xx_Intensity
This change the intensity from minimum to maximum.
Before the led intensity barely changed, now if goes from very dark to maximum.

The color change issue is solved at Rev 1531.

It is ok respet to intensity, it is adjustable by soft, no problem.

But maybe it would be good and more confortable if the default intensity was a high level.

But maybe it would be good and more confortable if the default intensity was a high level.

At start up registers are cleared, so values are 0.

You need to set intensity by software.