Would you like to react to this message? Create an account in a few clicks or log in to continue.

You are not connected. Please login or register

Wave generator

2 posters

Go down  Message [Page 1 of 1]

1Wave generator Empty Wave generator Fri Jun 18, 2021 6:13 pm

injiniero



Wave generator Doblad10

Hi.

In a wave generator, where is the reference wire?

In the above circuit I want to inject a sin wave (+12v / -12v) to the diodes and connect the middle point between capacitors to the wave return wire. (Not ground)

Is this possible? how?

Thanks

2Wave generator Empty Re: Wave generator Fri Jun 18, 2021 7:59 pm

arcachofo

arcachofo

In a wave generator, where is the reference wire?
The reference is ground.

In the above circuit I want to inject a sin wave (+12v / -12v) to the diodes and connect the middle point between capacitors to the wave return wire. (Not ground)

Is this possible? how?
Just how you did should work.

To get a sin wave +12v / -12v, set property "Volt Base" to -12 and Voltage to 24.

3Wave generator Empty Re: Wave generator Fri Jun 18, 2021 8:36 pm

injiniero



Thank you!

Just a few questions about oscope:

Wave generator 2021-011

4Wave generator Empty Re: Wave generator Fri Jun 18, 2021 9:07 pm

arcachofo

arcachofo

I think you should try SimulIDE 0.4.15, the Oscilloscope is much better:



Related thread: https://simulide.forumotion.com/t89-about-oscilloscope-0-5-15

About your questions:
- That pin in the lower part is voltage reference for the oscilloscope.
- "Data size" can help to get more accuracy, but in general leave it alone.
- "Filter" filters voltage changes below that value.
- "Auto" appears when you click on "Expand" (plus other controls).

injiniero likes this post

5Wave generator Empty Re: Wave generator Fri Jun 18, 2021 9:16 pm

arcachofo

arcachofo

I forgot to mention:

To have an idea of the Oscilloscopoe in 0.4.14, have a look at these videos:

Working as Oscilloscope: https://youtu.be/QClVju-v9bQ

Working as Plotter: https://youtu.be/5uXqfOCjHB0

injiniero likes this post

6Wave generator Empty Re: Wave generator Sat Jun 19, 2021 8:39 am

injiniero



arcachofo wrote:I think you should try SimulIDE 0.4.15, the Oscilloscope is much better:

Installed and working perfectly!
Thank you.

arcachofo likes this post

Sponsored content



Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum